Villager V 722, Original Instruction Manual, Page: 55 / 193

24
Villager V 722 (GB)

Start the engine and check for leakage. Stop the engine and check the oil level.
5.1.9 Check the pressure:
Service interval: 40 hours.
Stop the engine, wait for all moving parts to stop and remove the key:

Inspect the tire pressure of the drive wheels.

Pump the drive wheel tires to 30ps (210kPa).

Inspect tire pressure in the castors.

Pump the castor tires up to 30 psi (210 kPa).
5.1.10 Check the condition of the belts:
Service interval 40 hours.

Stop the engine, wait for all moving parts to stop and remove the key.

Inspect all belts.

Remove the left and right belt buckles on the housing and place them on the
side to inspect the belts.

See sections 5.2.2, 5.2.2.1 and 5.2.3 for adjusting belts.
5.1.11 Lubricate the lubrication connections
Service interval: See in the table.

Stop the engine, wait for all moving parts to stop and remove the key. (See
Figure 7).
Lubrication diagram
LOCATION OF
THE
CONNECTOR
NUMBER OF
CONNECTORS
Service interval:
1 1 50 hours
2 1 50 hours