Villager SSV 7050 RS, Manual, Page: 42 / 252

14
ADDITIONAL SAFETY RULES FOR SCROLL SAWS
• This scroll saw is intended for use in dry conditions, and for indoor use only.
• Do not cut pieces of material too small to hold by hand outside the blade guard.
•
Avoid awkward hand positions where a sudden slip could cause a hand to move into
the blade.
• Always use the blade guard to avoid possible injury due to blade breakage.
• Never leave the scroll saw work area with the power on, or before the machine has
come to a complete stop.
•
Do not perform layout, assembly or set up work on the table while the cutting tool is in
operation.
• Never turn your scroll saw on before clearing the table of all objects: (tools, scraps of
wood, etc) except for the workpiece and related feed or support devices for the
operation planned.
Remaining hazards
The machine has been built using modern technology in accordance with recognized
safety rules. Some remaining hazards, however, may still exist.
•
Long hair and loose clothing can be hazardous when the work piece is rotating. Wear
personal protective gear such as a hair net and tight fitting work clothes.
• Saw dust and wood chips can be hazardous. Wear personal protective gear such as
safety goggles and a dust mask.
•
The use of incorrect or damaged mains cables can lead to injuries caused by
electricity.
•
Even when all safety measures are taken, some remaining hazards which are not yet
evident may still be present.
•
Remaining hazards can be minimized by following the instructions in „Safety
Precautions“, „Proper Use“ and in the entire operating manual
.
•
Do not force the machine unnecessarily: excessive cutting pressure may lead to rapid
deterioration of the blade and a decrease in performance in terms of finish and cutting
precision.
• Avoid accidental starts: do not press the start button while inserting the plug into the
socket.
Keep this safety information in a safe place.