Villager SSV 7050 RS, Manual, Page: 40 / 252

12
- Do not use the electric tool for purposes for which it is not intended. For example, do not
use handheld circular saws for the cutting of branches or logs.
- Do not use the electric tool to cut firewood.
8. Wear suitable clothing
- Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
- Anti-slip footwear is recommended.
- Tie long hair back in a hair net.
9. Use protective equipment
- Wear protective goggles.
- Wear a mask when carrying out dust-creating work.
10. Connect the dust extraction device
- If connections for dust extraction and a collecting device are present, make sure that they
are connected and used properly.
- Operation in enclosed areas is only permitted with a suitable extraction system.
11. Do not use the cable for purposes for which it is not intended
Do not use the cable to pull the plug out of the outlet. Protect the cable from heat, oil and
sharp edges.
12. Secure the workpiece
- Use the clamping devices or a vice to hold the workpiece in place. In this manner, it is
held more securely than with your hand.
- An additional support is necessary for long workpieces (table, trestle, etc.) in order to
prevent the machine from tipping over.
- Always press the workpiece firmly against the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13. Avoid abnormal posture
- Make sure that you have secure footing and always maintain your balance.
- Avoid awkward hand positions in which a sudden slip could cause one or both hands to
come into contact with the saw blade).
14. Take care of your tools
- Keep cutting tools sharp and clean in order to be able to work better and more safely.
- Follow the instructions for lubrication and for tool replacement.
- Check the connection cable of the electric tool regularly and have it replaced by a
recognised specialist when damaged.
- Check extension cables regularly and replace them when damaged.
- Keep the handle dry, clean and free of oil and grease.
15. Pull the plug out of the outlet
- Never remove loose splinters, chips or jammed wood pieces from the running saw blade.
- During non-use of the electric tool or prior to maintenance and when replacing tools such
as saw blades, bits, milling heads.