14
15
1
1
1
2
3
2
2
Legs are packed in the cardboard top pack.
Note:
Legs should be installed near to where
appliance is to be used, as they are
not secure for long transit.
1
2
1
x4
Attach backguard to range with
screws provided.
Note:
It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot. Unscrew temporary legs
from couplings.
4
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
3
Screw legs into couplings on all
four corners.
Leg Installation
1
2
Measure the four corners in cutout area to verify if
flooring is level.
For uneven or sloped floors, level unit with
metal shims only, as the adjustment required may
exceed the thread available in the leg.
3
3/
8”
3/8”
(0.
95
cm
)
(0.95 cm)
3/
8”
(0.
95
cm
)
4
Move unit into opening.
Leveling/Adjustments/Alignment
Installing Backguard
5
Check that unit is level side to
side and front to back. Side trim of the high corner
must be 3/8” (0.95 cm) above countertop.
If leveling is required, move unit out of opening.
6
1
2
1
Lift unit and prop on wood blocks.
