12
Programming Features
3. Peer to Peer Settings
4. Outbound Proxy
If your SIP provider requires an outbound proxy IP address enter it in the Outbnd Proxy field. If outbound proxy is not
required enter the SIP server IP address into the Outbnd Proxy field.
Note:
If not required, this field must match your
SIP server IP address.
5. Authentication ID
If your SIP provider requires Authentication ID, enter it in the Authentic. ID field.
If Authentication ID is not required,
leave this field blank.
1. Unit Name
Up to a 31 character unit name can be assigned to the
Entry Phone
being programmed.
When registered to a SIP server in the event that registration is lost you can program the unit to re-resolve using the
current SIP server IP address or route pages through an alternate SIP server. With Alternate Server selected enter the
IP address of the alternate SIP server in the field next to the Register Fails drop down box.
Note:
With an alternate
SIP server IP address programmed, the IP address for the SIP server and alternate SIP server will be limited to 31
characters.
6. Register Fails (Re-Resolve or Alternate Server)
Enter the IP address or URL of your SIP server or service provider in this field. The SIP server IP address is limited to
74 characters.
Note:
If an alternate SIP server IP address is programmed, the IP address for the SIP server and
alternate SIP server will be limited to 31 characters.
Note:
If outbound proxy is not required, enter the SIP server IP
address into the Outbnd Proxy field.
2. SIP Server
When set to the Peer to Peer mode, a SIP server is not used. The
Entry Phone
will register to itself. Applications for
the Peer to Peer mode are very limited, as the
Entry Phone
is only able to call other IP phones or SIP devices that are
on the same LAN. The
Entry Phone
can not call analog extensions, digital phone extensions, telephone numbers that
are outside the phone system or another handsfree Viking IP device in this mode (see note below). To use the unit in
the Peer to Peer mode, change the drop-down in the “SIP Server / Peer to Peer Settings” from “Server” to “Peer to
Peer”, a Username must be assigned (can be any alpha/numeric string up to 31 characters) and the unit should be
programmed with a static IP address. Here is an example to show how the calling process works:
Entry Phone
Destination IP Phone
IP Address
192.168.210.1
192.168.210.3
Extension Number
N/A
200
Username
Viking1
N/A
Entry Phone
calling the IP phone – you populate the first phone number field with [email protected] (the extension
number you are trying to call + @ + the IP address of the extension you are calling).
The IP phone calling the
Entry Phone
– a button on the IP phone is configured to dial [email protected] (the
Username assigned in the
Entry Phone
+ @ + the IP address of the
Entry Phone
).
Note:
A Viking handsfree IP Device calling another Viking handsfree IP Device is not recommended.
