Diagnostics
© 2008 Viking Preferred Service
16
Running the diagnostic programs
When you have entered the diagnostic mode, you will be able to run the following
nine
main test
programs:
1. Run all tests
2. Product Information
3. Individual display tests
4. Individual upper oven tests
5. Individual lower oven tests
6. Individual keyboard tests
7. Run all upper oven tests
8. Run all lower oven tests
9. Run all keyboard test
1.
Run all test
This test will allow you to check the entire oven, including all the components, display elements and
keyboard test. Hit “SET” button to run this test. Please turn to page
20
for the test procedure.
Use the Down arrow to access the next test (
Product Information
)
2. Product
Information
This test will allow you to view the information page, which contains the software version and
microprocessor serial number. Hit the “SET” button to view this information. Please turn to
page
22 f
or the test procedure.
Use the Down arrow to access the next test (
Individual display test
) or the UP arrow to access the
previous test (
Run all tests)
.
SETTINGS: TESTS
Product information
SETTINGS: TESTS
Run all Tests
SETTINGS: TESTS
Run all Tests
Summary of Contents for Designer DEDO530T
