Diagnostics
© 2008 Viking Preferred Service
15
Accessing the diagnostic program
1.
Activate the main control panel by selecting either the Upper or Lower oven touch pad. Below
is the screen you will see when the Upper oven is selected.
2.
Depress the “SETTINGS button on the control panel. You will see he word
“SETTINGS” in the upper left corner of the screen and the Brightness parameter
3.
Using the DOWN arrow ( ), scroll down until you see “TIMEOUTS… in the display.
4.
Touch the Down arrow ( ) for 5 seconds (you will here 3 tones) until the display changes
from “Timeouts…” to “TESTS…”
5.
Now, depress the “ENTER” key. The word TESTS will begin to flash. While flashing, enter
in the following code: 8 – 4 – 5 – 4 – 6 – 4 (V-I-K-I-N-G). When you have successfully
entered in the code, the display will change and read “RUN ALL TESTS”. You are now in
the diagnostic mode.
UPPER OVEN
SELECT MODE
12:02
CLOCK
SETTINGS
BRIGHTNESS: 100 %
SETTINGS
TIMEOUTS · · ·
SETTINGS
TESTS · · ·
Summary of Contents for Designer DEDO530T
