© 2010 Viking Preferred Service
68
Dispenser and User Interface (continued)
5.
From inside of eschutcheon, depress tabs to
release dispenser board.
6. Repair or replace dispenser board.
7. Reverse procedure to reinstall.
Ice Chute Assembly
1.
Remove dispenser,
(see steps 1-4 dispenser
section, page 56).
2.
Remove tube ring from ice chute assembly.
3.
Disengage dispenser tube from ice chute
assembly, remove grounding screw and
securing screws.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Service Diagnostics and Procedures–Disassembly
Eschutcheon
Dispenser Board
Tab
Tube Ring
Ice Chute Assembly
Ground Screw
Dispenser Tube
Screw
