Vig410P Motherboard Manual
110
Flow Control
This feature allows the user to set the flow control for Console Redirection. The options
are
None
, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power-On Self-Test (POST).
Select Always to keep Console Redirection active all the time after POST. (Note: This
setting may not be supported by some operating systems.) Select Boot Loader to keep
Console Redirection active during POST and Boot Loader. The options are Disabled,
Boot Loader, and
Always
.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirection.
The options are ANSI,
VT100
, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard definition that provides a way to send commands from a remote
console. Available options are
Enabled
and Disabled.
Sredir Memory Display Delay
This feature defines the length of time in seconds to display memory information. The
options are
No Delay,
Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
Hardware Health Monitor
This feature allows the user to monitor system health and review the status of each
item as displayed.
CPU Overheat Alarm
This option allows the user to select the CPU Overheat Alarm setting which determines
when the CPU OH alarm will be activated to provide warning of possible CPU overheat.
Warning!
1. Any temperature that exceeds the CPU threshold temperature predefined by the
CPU manufacturer may result in CPU overheat or system instability. When the CPU
temperature reaches this predefined threshold, the CPU and system cooling fans
will run at full speed.
2. To avoid possible system overheating, please be sure to provide adequate airflow
to your system.
The options are:
The Early Alarm:
Select this setting if you want the CPU overheat alarm
(including the LED and the buzzer) to be triggered as soon as the CPU
temperature reaches the CPU overheat threshold as predefined by the CPU
manufacturer.
