Vig395P Motherboard Manual
91
3. When the following message is displayed: "The array is already marked bootable.
Do you want to make this array as not bootable? (Yes/No), Enter Y to delete a
bootable array. The bootable array will be deleted and the asterisk will disappear.
Note:
Do not use the delete key to delete the bootable array.
Adding/Deleting Hotspares
To add a Hotspare:
Note:
In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add anew
HDD as a hotspare.
1. From the main menu (shown on Page 82), select Add/Delete Hotspares.
2. Use the up and down arrow keys to highlight and select the disk you want to
designate as a hotspare, and press <Insert>, and then, press <Enter>.
3. Press Yes when the following prompt is displayed: "Do you want to create spare?"
(Yes/No?) The spare you have selected will appear in the Selected drives Menu.
To delete a Hotspare:
1. From the main menu (shown on Page 82), select Add/Delete Hotspares.
2. Use the up and down arrow keys to highlight and select the Hotspare you want to
delete, and press <delete>, and then, press <Enter>.
3. When the following warning is displayed: "Do you want to delete the hot spare?"
(Yes/No?), press Yes to delete the hotspare you have selected.
Figure 65:
Deleting Hotspare
