Vig395P Motherboard Manual
117
•
I/O Device Configuration
Access the submenu to make changes to the following settings.
KBC Clock Input
This setting allows you to select clock frequency for KBC. The options are 6MHz,
8MHz,
12MHz,
and 16MHz.
Serial Port A
This setting allows you to assign control of serial port A. The options are
Enabled
(user
defined), Disabled, and Auto (BIOS- or OS- controlled).
Base I/O Address
This setting allows you to select the base I/O address for serial port A. The options are
3F8
, 2F8, 3E8, and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port A. The
options are IRQ3 and
IRQ4
.
Serial Port B
This setting allows you to assign control of serial port B. The options are
Enabled
(user
defined), Disabled, Auto (BIOS controlled) and OS Controlled.
Mode
This setting allows you to set the type of device that will be connected to serial port B.
The options are
Normal
and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for serial port B. The options are
3F8,
2F8
, 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port B. The
options are
IRQ3
and IRQ4.
Parallel Port
This setting allows you to assign control of the parallel port. The options are
Enabled
(user defined), Disabled and Auto (BIOS-or OS- controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
378
, 278 and 3BC.
Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port. The
options are IRQ5 and
IRQ7
.
