LT0676 Issue 1.00
6 December 2017
Page 8 of 8
PART NUMBERS
FP1115, FP,T-Gen 60,24V,C/W INSTALL LIT & MTG
T-Gen 60 model of T-Gen2 able to drive a speaker load up to 60W. Supports two non-emergency audio inputs (BGM,
paging), a microphone audio input (Speech or Paging), 6 supervised inputs (Alarm, Fault, Paging), 4 open-collector
outputs, normally-energised Fault relay, supervised single polarity strobe output, and 100V speaker output.
FP1116, FP,T-Gen 120,24V,C/W INSTALL LIT & MTG
T-Gen 120 model of T-Gen2 able to drive a speaker load up to 120W.
FP1117, FP,100V SWITCHING MODULE,C/W LIT,LOOMS & MTG BRK
Provides 4 supervised, short-circuit isolated 100V outputs (each rated at 100W) from the T-
Gen2’s 100V output, along
with control of each output by the T-Gen2 to provide area paging. A QBus slave module. Supplied on
MX1
-style
mounting bracket with cables and EOLs. Mounts on the BOWS cabinet. Can be used as a spare part or expansion
module for FP1137.
FP1118, FP,100V SPLITTER MODULE,C/W LIT,LOOMS & MTG BRKT
Provides 4 supervised, short-circuit isolated 100V outputs (each rated at 100W) from the T-
Gen2’s 100V output. No
control of the outputs is available. Signals fault to the T-Gen2 by superimposing a fault on the T-
Gen2’s 100V input.
Standalone operation (not a QBus slave). Supplied on
MX1
-style mounting bracket with cables and EOLs. Can be used
as a spare part of expansion module for FP1137.
FP1122 FP,GRADE 3 EWS UI 3U DOOR,C/W LOOM & MIC,GREY
A grey
3U 19” rack mounting door complete with a Grade 3 user interface and PA microphone ready for connection to a
T-Gen60 or T-Gen120 mounted inside the cabinet. A 1.5m power loom and microphone extension loom are included,
long enough to connect to the T-Gen2 mounted on the gear plate in a 40U deep cabinet, for example. Can be used as a
spare part for the User Interface.
ME0343S, MECH ASSY,1966-85,PSU2412F 24V 10A 2U RACK,BENTEL
18U BOWS replacement PSU
– keep loom in BOWS that plugs into J7 of PSU.
ME0476S, MECH ASSY,1901-294,MX4428 24V 5A PSU,BENTEL
8U BOWS replacement PSU
– keep loom in BOWS that plugs into J7 of PSU.
ME0490 Mech Assy, 1955-44, T-GEN50, Dynamic Microphone
A noise-cancelling dynamic microphone suitable for plugging onto the T-Gen2 to provide emergency PA or for field
recording of the digitised speech message(s). Includes a 1m extension lead. Suitable as a spare part for the
microphone in the BOWS.
SU0360 A 4488 4 Zone Paging Console:
A 4 zone paging console with microphone and chime option that can be
used with the SU0361 A 4489 Audio Switcher to achieve 4 area paging from remote locations. Up to two paging
consoles can be connected to the SU0361 Audio Switch.
SU0361 A 4489 Audio Switcher:
Used with the A 4428 4 zone paging console to provide relay outputs. Able to be
mounted inside the BOWS cabinet.
© 2017. Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date
and are subject to change without notice.
Manufactured
Johnson Controls
Distributed
by:
17 Mary Muller Drive, PO Box 19-545
by:
Christchurch, New Zealand
Tel
+64-3-389 5096
Fax
+64-3-389-5938
