Vigilant T-Gen2, Installation Instructions Manual

Page: 7 / 8

LT0676 Issue 1.00 6 December 2017 Page 7 of 8
SPECIFICATIONS
FP1136 FP1137
Weight 17kg 42kg
Size 550 x 440 x 210mm 575 x 885 x 388mm
PSU Output Current (Peak) 5A 10A
DC Supply Voltage 19.2Vmin - 28.8Vmax 19.2Vmin - 28.8Vmax
Operating Temperature Range -5C to +45C -5C to +45C
Relative Humidity 0 to 95% non-condensing 0 to 95% non-condensing
Storage Temperature Range
-20C to +70C -20C to +70C
Quiescent Current
Power Save Mode (Audio turned off) 65mA 65mA
Audio enabled but idle (no audio) 190mA 190mA
Active Current - 27Vdc (plus Strobe) 3.0A @ 60W 6.0A @ 120W
Avg Alarm Current (plus Strobe)
AS4428.16 Evacuate Tone 1A @ 60W 2A @ 120W
AS2220.1 Evacuate Tone 2.4A @ 60W 4.8A @ 120W
100V Output
Line Voltage - AC (Tones) 100V rms 100V rms
- DC (Supervision) 2.5V (56k ELD 5.0V (O/C)) 2.5V (56k ELD 5.0V (O/C))
Line Power - Tones 60W rms 120W rms
- Audio 60W rms 120W rms
Maximum line capacitance 200nF 200nF
Audio Frequency range
+/- 1dB 260Hz
– 3800Hz
260Hz
– 3800Hz
+/- 3dB 215Hz
– 8400Hz
215Hz
– 8400Hz
100V Speaker Line Supervision
ELD - 1 Branch 56k 0.4W 56k 0.4W
- 2 Branches 100k 0.4W 100k 0.4W
Strobe Output
ELD - 1 to 3 branches 1x10k - 3 x 27k 0.4W 1x10k - 3 x 27k 0.4W
Current rating Max 2.0A Max 2.0A
Audio Inputs
Audio 1 & Audio 2
230mVrms (min) into 5k

isolated for full power
230mVrms (min) into 5k

isolated for full power
Microphone - Input Level 3mVrms-100mVrms, PTT driven, supervised 3mVrms-100mVrms, PTT driven, supervised
Digital Inputs
Alarm, AIE, GP1-4 10k EOL, <3.5V Active 10k EOL, <3.5V Active
Open Collector O/Ps
OC1 & OC2 <1V @ 100mA, 30Vdc
Optionally Load Supervised ( fault <12V)
<1V @ 100mA, 30Vdc
Optionally Load Supervised ( fault <12V)
OC3 & OC4 <1V @ 100mA, 30Vdc <1V @ 100mA, 30Vdc
Interfaces
OLED, 4 button menu structured
QBus compliant Master / Slave operation, User Interface and
100V Switching Module
Master / Slave operation, User Interface and
100V Switching Module
Slave T-Gen2 RJ45 cable within cabinet RJ45 cable within cabinet
On-board Storage 4MB (configuration and audio files) 4MB (configuration and audio files)
Micro-SD Card 32GB FAT32 support 32GB FAT32 support
Headphone Output (internal ) - Load
impedance
8

min 6mW 8

min 6mW