Page.33.
If your IP camera does not appear after scanning the network, you can manually add an IP camera by
clicking on the “Add” button on the bottom left. The URL address should be identical to the ONVIF
camera service address. (With your camera’s IP address entered into the URL). Click OK to add the
manually entered camera and then click the “Refresh” button.
Click the button “Refresh”, tester will scan the ONVIF camera again.
Click the newly displayed ONVIF camera on the “Device List“. The tester will show the IP camera’s
relative information and settings.
Activate HIKVISION Camera :
while in Rapid mode, tester can auto recognized unactivated
HIKVISION Camera, And prompt "The camera is not active, you need to activate it", click "OK" to
start activate .
