Page.98.
After setting an advanced IP address (refer to the photos above), the unit can test two network segments
(192.168.0.0) and (192.168.1.0)
WLAN Net:
Turn WiFi off or on by pressing the “Open the wifi” button. Once WiFi is turned on, it
will scan for wireless networks in your area. Select the desired wireless network SSID and enter your
password to connect.
Brightness
:
Set the desired brightness of the IP tester and adjust the sleep time settings.
Volume:
Set volume level
SD Card:
Displays SD Card Capacity. You can also format the SD card or unmount it before removing
it.
FTP server:
Once the IP tester connects to a network, a computer can be used to read the SD card files
via FTP
