Copy the error line of the
“bdisp.txt” batch file to
“Gprobe:>”
2.
If the firmware upgrade still fails, reboot the PC, or simply use another PC to upgrade.
3.
If the above procedures don’t work, unplug and re-plug the power cord of VP912. Then try to upgrade the
firmware again if VP912 can be powered on.
If VP912 cannot be turned on, that means the flash memory of
the main board is out of work.
You then have to replace the main board.
3. DDC Key In Procedure
Note:
1.
Every time after replacing the main board, you have to do the DDC key in.
2.
If you find the DDC does not conform to the monitor, you have to do the DDC key in.
3.1 Equipment Needed
- VP912 Series Monitor
- Fixture (V3) for DDC Key in (JP3 must be closed)
- RS232 Cable (P/N: 42.55907.001) *1
- VGA Cable (P/N: 42.59901.008) *2
- DVI-DVI Cable *1
36
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VP912s/b
Summary of Contents for VLCDS25973-4W
Page 30: ...27 ViewSonic Corporation Confidential Do Not Copy VP912s b ...
Page 31: ...28 ViewSonic Corporation Confidential Do Not Copy VP912s b ...
Page 32: ...29 ViewSonic Corporation Confidential Do Not Copy VP912s b ...
Page 81: ...11 PCB Layout Diagrams 78 ViewSonic Corporation Confidential Do Not Copy VP912s b ...