ViewSonic PJD6250L User Manual Download

Page: 6 / 87

Copyright Information

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft

Corpor

ation in the United States and other countries.

ViewSonic and the three birds logo are registered trademarks of ViewSonic

Corporation.

VESA is a registered trademark of the Video Electronics Standards Association.

DPMS and DDC are trademarks of VESA.

PS/2, VGA and XGA are registered trademarks of International Business Machines

Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors

or omissions contained herein; nor for incidental or consequential damages resulting

from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves

the right to change product spec

ifications without notice. Information in this

document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means,

for any purpose without prior written permission from ViewSonic Corporation.

Summary of Contents for PJD6250L
























































































Search results

Summary of Contents for PJD6250L

Reviews:

Related manuals for PJD6250L

Brands by name

Popular brands

ViewSonic PJD6250L, User Manual

Search results

Summary of Contents for PJD6250L

Reviews:

Related manuals for PJD6250L

Brands by name

Popular brands