manualshive.com logo in svg

ViewSonic IFP32-2 Series, User Manual

Share
Download
ViewSonic IFP32-2 Series User Manual Download Page 121

121

Troubleshooting

This section describes some common problems that you may experience when 

using the ViewBoard.

Problem or Issue

Possible Solutions

Remote Control is not 

working

1. 

Check whether something is obstructing the 

display’s remote control receiver.

2. 

Check whether the batteries in the remote control 

are installed correctly.

3. 

Check whether the batteries need to be replaced.

The unit turns off 

unexpectedly

1. 

Check whether Sleep mode is enabled.

2. 

Check if there is a power outage in your area.

3. 

Turn on the display and see if the problem is with 

the signal and control system.

PC Mode

Problem or Issue

Possible Solutions

No PC signal

1. 

Check the display settings.

2. 

Check the display resolution.

3. 

Adjust the Hs &Vs (synchronization) settings using 

the OSD menu.

Background streaking

1. 

Choose auto adjust.

2. 

Adjust clock and phase.

False color

1. 

Check the VGA connection.

2. 

Adjust the chroma, brightness, and contrast 

settings.

Unsupported format

1. 

Choose auto adjust.

2. 

Adjust clock and phase settings.

Summary of Contents for IFP32-2 Series





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands