background image

Disclaimer and Warning

Legends:

1.1 Introduction

1.Product Introduction

1

Important Note

Warning

Min Z10TIRM is the lightest LRF Viewpro gimbal camera currently 
which with weight 598g. It is a powerful 3-aixs is a powerful 3-axis 
gimbal integrated with a 4.08MP 10x optical zoom camera, 24mm 
lens 640*512 IR thermal sensor and 1.5km laser rangefinder. It 
supports visible optical zoom, IR thermal and visible PIP switch, IR 
color palette switch, photographing and video, target tracking, 
thermal digital zoom and laser ranging. When the external GPS and 
time input, the OSD can display angle, zoom times, target GPS 
location, target distance measured, real-time, tracking frame, photo 
and video status, also can select to turn off the OSD. It features fast 

Congratulations on purchasing your new Viewpro product. Please 
read this entire document carefully. Failure to read or follow instruc-
tions and warnings in this document may result in damage to your 
Viewpro product. Disassemble the gimbal camera by user is not 
permitted, which may cause the camera does not to work normally.

Viewpro accepts no liability for damage, injury or any legal responsi-
bility incurred directly or indirectly from the use of this project. The 
user shall observe safe and lawful practices including, but not 
limited to, those set forth in the manual.

Summary of Contents for Z10TIRM






























Reviews: