17
Energy consumption correction factor
You can enter a correction factor to adjust the dis-
played (calculated) values for energy consumption/fuel
consumption to the actual values (as measured by the
meter in your home). The calculated value is multiplied
by the correction factor. However, due to seasonal cli-
mate conditions and other factors, discrepancies may
still arise.
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
/ for the
"Energy cockpit"
3.
in conjunction with a gas boiler
or
in conjunction with an oil boiler
4.
for
"Fuel consumption"
5.
"Input adjustment factor"
6.
/
for the required correction factor
7.
to confirm
Vitotronic 300: Central heating and DHW heating energy consumption distribution
Specify the ratio in which your total energy consump-
tion (100 %) is to be split for central heating and DHW
heating. You can estimate the values or establish them
through repeated meter readings (gas meter or oil con-
sumption) over the year.
The values set here are only used in the graphs for
energy consumption (
"Fuel consumption"
).
Factory setting:
■
DHW heating: 30 %
■
Central heating: 70 %
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
/ for the
"Energy cockpit"
3.
in conjunction with a gas boiler
or
in conjunction with an oil boiler
4.
for
"Fuel consumption"
5.
"Proportion DHW - heating"
6.
/
for the required value, either for
"DHW"
or
"Heating"
. The other value is adjusted automati-
cally so that the total of both values is 100 %.
7.
to confirm
Vitotronic 300: Set "Favourites"
You can set some menus as favourite for faster
access.
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
/ for
"Favourites"
3.
for the list of selectable menus.
4.
in the desired menu, e.g., in
"Time program,
DHW"
The selection is indicated by .
5.
to confirm
Vitotronic 300: Operating program information
Using the
"Operating program"
, you set whether you
want rooms heated, or DHW heating only, for example.
If your heating system has multiple heating circuits, set
the operating program separately for each one.
Control unit operation
Information in the "Energy cockpit"
(cont.)
5863758
Summary of Contents for VITOTRONIC 200
Page 71: ...71 5863758...
