28
This setting can only be made at the Vitotronic 300.
Set the
"Set DHW temperature"
for the DHW cylin-
der.
Factory setting: 50 °C
Setting range: 10 to 60 °C
Note
Your contractor can change the setting range. For this,
consult your contractor.
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
for the
"Main menu"
3.
"DHW"
for DHW heating settings
4.
"DHW set temperature"
5.
/ for the required value
6.
to confirm
Setting "Operating program" for DHW heating
This setting can only be made at the Vitotronic 300.
Enable the
"Operating program"
for DHW heating.
The setting is required only where the
"Standby
mode"
"Operating program"
is set.
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
for the
"Main menu"
3.
"Heating"
for central heating settings
4.
"Heating circuit 1"
or
"Heating circuit 2"
or
"Heating circuit 3"
5.
"Operating program"
6.
■
"Only DHW"
or
■
"Heating and DHW"
7.
to confirm
For information on the operating programs, see
page 17.
Setting the "Time program" for DHW heating
This setting can only be made at the Vitotronic 300.
Set individual time phases for DHW heating. DHW
heating is enabled during these time phases. DHW
heating starts automatically as soon as the DHW tem-
perature falls below the set value.
Factory setting:
"Automatic"
In automatic mode, DHW heating starts automatically
half an hour before the central heating to standard
room temperature time phase. E.g., DHW heating will
start at 05:30 h if the start time for central heating is
06:00 h. This means hot water is already available
when your system starts operating at standard room
temperature.
Note
Your system is factory-configured as a "Detached
house". All heating circuits in your system are
assigned to a house or home.
If you want to assign your heating circuits to individual
homes, your contractor can change this setting to
"Apartment building". The "Apartment building" setting
allows you to select the heating circuits, and therefore
the homes, to which the time program applies.
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
for the
"Main menu"
Vitotronic 300: DHW heating
Setting DHW temperature
5863758
Summary of Contents for VITOTRONIC 200
Page 71: ...71 5863758...
