37
Resetting operating data (meter)
You can reset the following operating data to zero:
Vitotronic 300
Vitotronic 100
"Burner hours run"
"Burner hours run"
"Burner starts"
"Burner starts"
"Solar circuit pump"
—
"Solar energy"
—
"SM1 output 22"
(hours run)
—
"All data"
"All data"
Tap the following on-screen buttons:
1.
If required, for the home screen
2.
for the
"Main menu"
3.
"Information"
4.
"Reset data"
5.
at the required data point
or
"All data"
6.
to confirm
or
to cancel the procedure.
Calling up service messages
Your contractor can set service intervals (limits) (e.g.
for burner hours run). As soon as the limits are excee-
ded, a service message is generated.
If your system is due for a service, this is indicated on
the display with the symbol and
"Service"
.
If you have entered the contact details for your con-
tractor (see page 32), these are also displayed.
Tap
.
flashes in the navigation area.
Calling up a service message
Tap the following on-screen buttons:
1.
in the navigation area.
The service message appears in a list.
If several messages are present at once, the fol-
lowing menus may appear after you tap :
■
"Fault list"
for faults in the heating system
■
"Burner fault"
for faults on burner control unit or
boiler burner
■
"Service messages"
for pending service work
2. "Service messages"
The service messages appear in a list.
3.
With you can call up notes about the service
message.
4.
Notify your heating contractor.
Note
If your system is remotely monitored by your heat-
ing contractor, service messages are forwarded
automatically.
5.
to acknowledge all service messages.
6.
to confirm.
Note
If the service cannot be carried out until a later
date, the service message will be displayed again
the following Monday.
Note
"Service messages"
from a Vitotronic 100 are
not
transferred to the Vitotronic 300.
"Service messages"
must be acknowledged at the relevant Vitotronic con-
trol unit (Vitotronic 100 or Vitotronic 300).
Calling up information
Calling up information
(cont.)
5863758
Summary of Contents for VITOTRONIC 200
Page 71: ...71 5863758...
