17
Required settings
The following settings are required for central heating:
■
Select heating circuit: See page 17.
■
Setting room temperature: See page 17.
■
Setting operating program: See page 18.
■
Setting time program: See page 18.
Setting
Selecting a heating circuit
The heating of your interior can be split over several
heating circuits.
■
In the case of heating systems with several heating
circuits, for all central heating settings, first select the
heating circuit where you want to make a change.
■
This selection is not possible in heating systems with
only one heating circuit.
Example:
■
"Heating circuit 1"
is the heating circuit for the
rooms occupied by you.
■
"Heating circuit 2"
is the heating circuit for the
rooms of a separate apartment.
Ú
Htg circuit selection
HC2
Was selected
Heating circuit 2
Heating circuit 1
HC1
Economy mode
Select with
(
Party mode
Heating program
Set room temp.
ß
21 °C
Ù
Ú
HC2
Ù
Ú
HC1
Fig. 11
The heating circuits are marked at the factory as
"Heating circuit 1"
(
HC1
) and
"Heating circuit 2"
(
HC2
).
If you or your heating contractor have renamed the
heating circuits (e.g. to "Apartment" or similar), that
name is shown in place of
"Heating circuit 1"
. See
Setting the standard room temperature
Press the following buttons:
1.
ä
repeatedly until the "standard menu" is dis-
played.
2.
|
/
~
to select
"Heating"
.
3.
d
to confirm.
4.
Ù
/
Ú
to select
"Heating circuit 1"
(HC1),
"Heat-
ing circuit 2"
(HC2),
"Heating circuit 3"
(HC3) or
"Heating circuit 4"
(HC4, if instal-
led).
5.
|
/
~
for
"Set room temp"
.
6.
d
to confirm.
7.
|
/
~
for the required temperature.
8.
d
to confirm.
"Adopted"
appears briefly in the dialogue
line of the display.
Central heating
Room temperature
5679252
