18
Setting the reduced room temperature (night setback)
Heating circuit 1
Select with
Set red. room temp.
Set room temp.
Heating program
Party mode
HC1
Fig. 12
Press the following buttons:
1.
å
for the "Extended menu".
2.
|
/
~
to select
"Heating"
.
3.
d
to confirm.
4.
Ù
/
Ú
to select
"Heating circuit 1"
(HC1),
"Heat-
ing circuit 2"
(HC2),
"Heating circuit 3"
(HC3) or
"Heating circuit 4"
(HC4, if instal-
led).
5.
|
/
~
For
"Set red room temp"
.
6.
d
to confirm.
7.
|
/
~
for the required temperature.
8.
d
to confirm.
"Adopted"
appears briefly in the dialogue
line of the display.
Operating program
Setting the operating program for central heating
Check if
"Heating"
is set for the relevant heating cir-
cuit.
Heating circuit 1
Party mode
Economy mode
Set room temp.
HC1
Select with
Heating program
Fig. 13
Press the following buttons:
1.
ä
repeatedly until the "standard menu" is dis-
played.
2.
|
/
~
for
"Heating"
.
3.
d
to confirm.
4.
Ù
/
Ú
to select
"Heating circuit 1"
(HC1),
"Heat-
ing circuit 2"
(HC2),
"Heating circuit 3"
(HC3) or
"Heating circuit 4"
(HC4, if instal-
led).
5.
|
/
~
for
"Operating program"
.
6.
d
to confirm.
The check mark must be next to
"Heating"
.
If not, proceed as follows:
7.
|
/
~
for
"Heating"
.
8.
d
to confirm.
The rooms of the selected heating circuit are heated in
accordance with the room temperature and time pro-
gram settings.
Time program
Setting the time program for central heating
The time when the heating circuit delivers central heat-
ing with standard or reduced room temperature is
dependent on the settings of the switching times for
the relevant day (4 possible time phases).
■
If one or more time phases are set, central heating
with standard room temperature will be active for
those times.
■
If no time phases are set, central heating will be ena-
bled for the whole day with reduced room tempera-
ture.
Central heating
Room temperature
(cont.)
5679252
