35
Press the following buttons:
1.
å
for the "Extended menu".
2.
|
/
~
for
"Settings"
.
3.
d
to confirm.
4.
|
/
~
for
"Contrast"
.
5.
d
to confirm.
6.
|
/
~
for the required contrast.
7.
d
to confirm.
Setting the brightness of the display
You would like to be able to read the text in the menu
better. You can individually adjust the brightness of the
controls and the screensaver.
Press the following buttons:
1.
å
for the "Extended menu".
2.
|
/
~
for
"Settings"
.
3.
d
to confirm.
4.
|
/
~
for
"Brightness"
.
5.
d
to confirm.
6.
|
/
~
for
"Controls"
or
"Screensaver"
.
7.
d
to confirm.
8.
|
/
~
for the required brightness.
9.
d
to confirm.
Assigning names to heating circuits
You can give heating circuits 1, 2, 3 and 4 (
"HC1"
,
"HC2"
,
"HC3"
and
"HC4"
) individual names. The
abbreviations
"HC1"
,
"HC2"
,
"HC3"
and
"HC4"
are
retained.
Press the following buttons:
1.
å
for the "Extended menu".
2.
|
/
~
for
"Settings"
.
3.
d
to confirm.
4.
|
/
~
for
"Heating circ desig"
.
5.
d
to confirm.
6.
|
/
~
to select
"Heating circuit 1"
(HC1),
"Heat-
ing circuit 2"
(HC2),
"Heating circuit 3"
(HC3) or
"Heating circuit 4"
(HC4, if
installed).
7.
d
to confirm.
8.
|
/
~
to change the letters.
9.
Ù
/
Ú
to select the next character.
10.
d
to confirm.
The name assigned to the relevant
"Heating circuit"
appears on the home screen, in the
"Standard menu"
and, if available, on the remote control display.
Further adjustments
Setting the display contrast
5679252
