Viessmann VITOGAS Technical Manual Download Page 35

Page: 35 / 64

Safety assembly to DIN 1988

Safety assembly, comprising:
■ Shut-off valve
■ Non-return valve and test connector
■ Pressure gauge connector
■ Diaphragm safety valve
For DHW cylinder:
■ Up to 200 litre capacity: DN 15/R ¾

Maximum heat input 75 kW
10 bar:

Part no. 7219 722

■ From 300 to 1000 litre capacity: DN 20/R 1

Maximum heat input 150 kW
10 bar:

Part no. 7180 662

4.2 Accessories for heating circuits

Divicon heating circuit distributor

Construction and function

■ Available with R ¾ , R 1 and R 1¼ connections.
■ With heating circuit pump, check valve, ball valves with integral ther-

mometers and 3-way mixer or without mixer.

■ Quick and simple installation through pre-assembled unit and com-

pact design.

■ Low radiation losses through all-round thermal insulation shells.
■ Low electricity costs and precise control characteristics through the

use of high efficiency pumps and optimised mixer curve.

■ Also available with staged pumps.
■ The bypass valve for hydraulic balancing of the heating system is

available as an accessory as a threaded component for inserting into
the prepared hole in the cast body.

■ The overflow valve may be required when using staged pumps to

prevent the heating system running noisily. It is mounted onto the
Divicon.

■ For direct connection on the boiler by means of a pipe assembly

(single installation) or for wall mounting as single as well as double
or triple manifold.

■ Also available as kit. For further details, see the Viessmann pricelist.

Installation accessories

(cont.)

VITOGAS

VIESMANN

5822 428 GB

Summary of Contents for VITOGAS

































































Search results

Summary of Contents for VITOGAS

Reviews:

Brands by name

Popular brands

Viessmann VITOGAS, Technical Manual

Search results

Summary of Contents for VITOGAS

Reviews:

Brands by name

Popular brands