Viessmann Vitodens 100-W B1HF Series, Installation And Service Instructions Manual

Page: 31 / 108

31
Commissioning steps
Inspection steps
Maintenance steps Page
•
1. Commissioning the system ............................................................................................... 32
• •
2. Filling the heating system ................................................................................................. 36
• • •
3. Checking all connections on the heating water and DHW sides for leaks ................... 37
•
4. Venting the heating system ............................................................................................... 37
•
5. Checking the gas type ....................................................................................................... 38
•
6. Converting the gas type for operation with LPG ............................................................. 38
• • •
7. Removing the front panel .................................................................................................. 39
• • •
8. Checking the static pressure and supply pressure ........................................................ 40
•
9. Function sequence and possible faults ........................................................................... 41
•
10. Setting the maximum heating output ............................................................................... 42
• •
11. Performing an actuator test .............................................................................................. 42
•
12. Adjusting pump rate of integral circulation pump .......................................................... 42
•
13. Activating screed drying ................................................................................................... 44
•
14. Leak test on balanced flue system (annular gap check) ................................................ 44
•
15. Burner adjustment when connecting multiple flues to a shared flue system .............. 45
•
16. Removing the burner ......................................................................................................... 45
• •
17. Checking the burner gasket and burner gauze assembly .............................................. 47
• •
18. Checking and adjusting the ignition and ionisation electrodes .................................... 48
• •
19. Checking the back draught safety devices ...................................................................... 48
•
20. Cleaning the heating surfaces .......................................................................................... 49
• •
21. Checking the condensate drain and cleaning the trap ................................................... 49
• •
22. Installing the burner ........................................................................................................... 51
• •
23. Checking the neutralising system (if installed)
•
24. Checking the flow limiter (only for gas condensing combi boiler) ............................... 52
• • •
25. Checking the expansion vessel and system pressure ................................................... 52
• • •
26. Checking the safety valve function
• • •
27. Checking the electrical connections for firm seating ..................................................... 53
• • •
28. Checking all gas equipment for leaks at operating pressure ........................................ 53
• • •
29. Fitting the front panel ........................................................................................................ 53
• •
30. Checking the combustion quality ..................................................................................... 54
• • •
31. Checking the flue system for unrestricted flow and leaks
• • •
32. Checking the external LPG safety valve (if installed)
•
33. Matching the control unit to the heating system ............................................................ 55
•
34. Adjusting the heating curves ............................................................................................ 55
•
35. Instructing the system user .............................................................................................. 55
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
6167586