GB
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page 3 GB
Right reserved to make technical changes!
1. Gerneral notes
1.1 Area of validity
This assembly manual is valid for TectoCell coldrooms with
the following surfaces:
- Viessmann Standard white powder coating
- stainless steel flooring
1.2 Extract from the conditions of guarantee
No guarantee is assumed for damage resulting from
improper use, improper assembly or operation by the
buyer or other parties, natural wear, improper or negligent
handling, or chemical/electro chemical influence, insofar as
this is not our fault, or resulting from inattention to the
assembly, operating and maintenance instructions,
improper alterations or maintenance done by the buyer or
third parties, or as a result of use of parts supplied by other
manufacturers.
Caution!
The ceiling panels are not designed for additional loads
(i.e. snow or wind pressure). Prior to accessing on the
ceiling or installing a ceiling refrigeration unit, or other
elements such as hanging rails, pipes, etc., additional
support must be provided during assembly.
Attention!
During installation of the refrigeration unit, it must be
ensured that the evaporation ventilator does not blow
on the door and on the pressure compensation valve.
1.3 Supplied condition
The TectoCell coldroom and deep-freezing room is
supplied in individual packing units. The individual
panels are designated by labels or numbers.
Door frame heating and extra socket are installed and
prewired in the door frame.
The door is already installed in the door frame.
The accessories for assembly are packed separately.
1.4 Unpacking and Handling
- Prior to and during unpacking a visual check of the
panels must be made in order to determine if any
damage has occurred during transport.
- Any damage must be noted immediately on the
freight papers and these must be sent to Viessmann.
Please note „Conditions in case of damage“! As a rule,
the „General Condtions for Transport Damage and
Hidden Transport Damage” apply.
- Before the packing material is disposed of, ensure
that it contains no loose parts are in it.
- In order to process the damage claim properly, we
request exact details of the damage (pictures) as well
as Type Designation and serial number.
