GB
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page 15 GB
7.3 - 7.4
Right reserved to make technical changes!
7.3 Fault Display
7.4 Deactivating the refrigeration unit
In case of longer periods of non-use or maintenance and
cleaning, deactivate the refrigeration unit by pulling the
plug. A short deactivation of the refrigeration unit can be
initiated by pushing the Start/Stop button
(StandBy
Mode).
The refrigeration unit and the other users connected to it
are still connected to the electrical power supply while in
StandBy
mode.
Note:
In case of loss of power, all the parameter settings are
retained.
Display
Meaning
F01
Short-circuit in room sensor
F02
Room sensor broken
F03
Pressostat fault
F04
Coldroom temperature too high
F05
Coldroom door open
F06
Coldroom temperature too low
F07
Refrigeration capacity too low
F08
Evaporator sensor faulty
F09
Condenser sensor faulty
F10
Emergency Switch ON
F11
Fault in EEPROM
