34
Fig. 31
No sound insulation due to incorrect fixing
points
Fitting the Victaulic couplings
Fig. 32
1.
Clean all Victaulic connections.
2.
Open Victaulic coupling
B
around 1 cm.
3.
Push Victaulic coupling
B
with inserted gasket as
far as it will go onto connection pipe
A
in the heat
pump.
4.
Insert adaptor connector
C
as far as it will go into
Victaulic coupling
B
.
5.
Engage Victaulic coupling
B
with a positive inter-
lock and no gaps.
6.
Carry out a pressure test.
Note
Only use the adaptor connector with flange (accesso-
ries) provided.
Connecting the primary circuit
!
Please note
The heat transfer medium can cause corrosion
damage to on-site lines and components.
Use components and pipes that are resistant to
the heat transfer medium. Never use zinc-
plated/galvanised pipes.
1.
Equip the primary circuit with an expansion vessel
and safety valve (in accordance with DIN 4757).
Note
■
The expansion vessel must be approved to
DIN 4807. Diaphragms of the expansion vessel
and safety valve must be suitable for the heat
transfer medium.
■
Discharge and drain pipes must terminate in a
container that can hold the maximum possible
expansion volume of the heat transfer medium.
2.
Ensure adequate thermal and anti-vibration insula-
tion of all pipes routed through walls.
3.
Connect the primary pipes to the heat pump.
!
Please note
Hydraulic connections subjected to mechani-
cal stress lead to leaks, vibrations and appli-
ance damage.
Connect on-site lines so that they are free of
load and torque stress.
!
Please note
If the casing is not carefully closed, damage
from condensation may occur.
■
When inserting cables, ensure the dia-
phragm grommets are seated correctly.
■
Ensure airtight sealing of the grommets
around the hydraulic lines.
4.
Insulate primary lines inside the building with ther-
mally insulating and vapour diffusion-proof materi-
als.
5.
Fill the primary circuit with Viessmann heat transfer
medium and vent. See page 56.
Installation sequence
Making the hydraulic connections
(cont.)
5855865
Installation
Summary of Contents for BW 352.B027
Page 83: ...83 5855865...
