12
External control
Flow temperature
40°C
Fig. 3
Return to previous step in the menu or cancel a
setting that has been started.
Cursor keys for scrolling through the menu or for
setting values
OK
Confirm selection or save the setting made.
Call up
"Operating info"
or additional information
on the selected menu.
Call up extended menu.
"Operating info"
The
"Operating info"
provides information in the form
of a quick guide that contains basic explanations on
appliance operation.
Calling up
"Operating info"
:
■
If the screensaver is active: Press
.
■
From any point in the menu: Press
until the standard display is shown. Press
.
Symbols on the display
These symbols are not always displayed, but appear
subject to the operating state of the heat pump.
Displays:
Frost protection is active.
Compressor is running.
Output for primary pump is being switched.
Messages
Note
Warning
Fault
Standard display
The heat pump is in the
"External control"
operating
state.
For further operation either switch to the extended
menu (see the following chapter) or to the service
menu (see page 14).
Operation
Programming unit
5800 917 GB
Operation
