16
Note
The width of the heat pump is indicated with and with-
out side panels. The dimensions without side panels
are the transport dimensions.
Type BW 302.C140 to BW 302.C230
1241
644
436
1126
368
343
200
911
1932
1650
850
Fig. 9
A
Flow, primary circuit (inlet):
Victaulic 3
"
(DN 80)
B
Flow, secondary circuit (outlet):
Victaulic 2
½"
(DN 65)
C
Return, primary circuit (outlet):
Victaulic 3
"
(DN 80)
D
Return, secondary circuit (inlet):
Victaulic 2
½"
(DN 65)
E
Low voltage < 50 V
F
Power supply 230 V/50 Hz
G
Power supply 400 V/50 Hz
Note
The width of the heat pump is indicated with and with-
out side panels. The dimensions without side panels
are the transport dimensions.
Hydraulic connection requirements
■
Make on-site hydraulic connections stress-free.
■
Make the hydraulic connections between several
heat pumps on site.
■
All components required for the cooling circuit must
be provided on site. This must be achieved with an
appropriately sized plate heat exchanger.
Preparing for installation
Requirements for on-site connections
(cont.)
5787 232 GB
Installation
Summary of Contents for BW 301.C090
Page 91: ...91 5787 232 GB...
