64
1.
Set the ON/OFF switch to OFF or 0 respectively.
2.
Undo both screws on the underside of the front
panel.
3.
!
Please note
The cables between the programming unit
and the wiring chamber can suffer damage.
Take care when removing the front panel
and observe the length of the cable (approx.
60 cm tolerance).
Put the front panel to one side and secure it
against falling over.
4.
Carefully remove top panel (see page 50).
Overview of electrical components
See from page 31.
Overview of internal components
Fig. 36
Example (type BW 302.C140)
1
Wiring chamber
2
Safety high pressure switch, stage 1
3
Safety high pressure switch, stage 2
(only type BW 302.C090 to BW 302.C230)
4
Pressure transmitter, high pressure
5
Suction gas temperature sensor
6
Pressure transmitter, low pressure
7
Temperature sensor, liquid line
8
Electronic expansion valve (EEV) with stepper
motor
9
Hot gas temperature sensor, compressor 2
(only type BW 302.C090 to BW 302.C230)
qP
Compressor 2
(only type BW 302.C090 to BW 302.C230)
Hot gas temperature sensor, compressor 1
qW
Compressor 1
Repairs
Removing the front panel and top panel
5787 232 GB
Maintenance
Summary of Contents for BW 301.C090
Page 91: ...91 5787 232 GB...
