Requirements:
n
The pipe end is not bent or damaged.
n
The pipe is deburred.
n
The correct sealing element is in the press connector.
EPDM = polished black
n
The sealing element is undamaged.
n
The complete sealing element is in the bead.
Push the press connector onto the pipe as far as it will go.
Mark the insertion depth.
Place the press jaw onto the press machine and push the retaining
bolt in until it clicks into place.
INFO! Observe the press tool instruction manual.
Handling
Easytop circulation regulation valve S/E with SC-Contur
21 from 27
