The following are monitored:
n
Retaining bolt
n
Pressing time
n
Voltage / battery capacity
n
Service intervals
n
Operating temperatures
Significance of the LEDs
LED
Status
Description
Green
flashing
Low battery charge level – Recharge bat‐
tery.
lit up
Machine is ready for operation.
Red
flashing
Machine is blocked – push retaining bolt
in.
lit up
Outside the recommended temperature
range (-5°C – 50°C)
Yellow
flashing
40000 strokes reached/exceeded – the
safety shutdown will occur after a further
2000 pressings
lit up
Machine is blocked – Machine is faulty,
or 42000 strokes reached
Use the On/Off button to switch the press machine on and off.
Keep the On/Off button pressed down to carry out a function test of the
LED indicator.
The press machine switches off automatically after ten
minutes if it is not used after switch-on.
If the power supply is interrupted during the pressing, the release button
can be used to manually return the roller head to its start position.
The press jaw fixture in the front part of the cylinder head is 180° rotat‐
able to allow for flexible alignment of the press jaws to the pressing
point.
On/Off button
Button for manual release
Rotatable cylinder head
Product information
Press machinePressgun 5
13
