Operation
Vidikron PlasmaView Owner’s Operating Manual
27
PRE
L
IMINAR
Y
Contrast:
On your external test pattern source, select a stepped, gray-bar pattern like the
one shown in Figure 4-4.
Figure 4-4. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast from the Picture Adjust menu. Using the left- and right-arrow (
)
buttons, adjust the contrast to a point just below which the white rectangle starts to increase
in size.
Color:
On your external test pattern source, select a color bar pattern like the one shown in
Figure 4-5.
Figure 4-5. Typical Color Bar Pattern for Adjusting Color Saturation and Tint
Brightness and contrast controls are interactive. A change to one may
require a subtle change to the other in order to achieve the optimum
setting.
Note
gray
yellow
cyan
gr
een
magenta
re
d
blue
