3 of 19
Introduction
The Art380 is a self contained telephone interface module for use on an analogue telephone
line. Its primary function is to enable a user to communicate with a telephone line and a door
entry point (or points) from the same telephone handset. This handset can be a standard
corded model, a cordless such as a DECT telephone or even a hands free telephone. The
Art380’s main features are listed below:-
o
Communicate with both a telephone line and door entry points.
o
Open a door using the telephone keypad.
o
Open the speech to a door entry point without first being called.
o
Activate up to two auxiliary outputs. (Outputs can be either momentary or latching).
o
Reverse the door open relay for use with power to lock releases.
o
Make the following call adjustments in programming mode:-
•
Number of rings (From 1 – 10 rings)
•
Door open time (From 1 – 18 seconds)
•
Door open key (Either 0(default), 8 or 9)
•
Internal/external speech volume.
o
Divert the call to another pre-programmed number.
or is engaged).
o
Program an access code to protect the programming and the use of facilities in either
divert mode or normal mode.
o
Operate in a hands free mode (Speech automatically adjusts the gain to the direction
of speech).
o
One way speech mode (Simplex speech)
o
PABX mode (Allows the units to operate without the need for a telephone line).
o
Dial in facility which allows the Art380 to be activated from an incoming telephone call.
Mounting instructions
The Art380 can be either mounted to a DIN rail or mounted directly to a wall. Begin by
removing the terminal side covers by unscrewing the retaining screws. Either clip the Art380
to a DIN rail or screw directly to the wall using two screws and suitable wall plugs. You should
leave the terminal side covers off until all connections have been made.
Safety notes
The system must be installed by a competent installer following the regulations in force. We
recommend:-
•
Use an appropriate fused spur to isolate the mains from the Art380.
•
Isolate the mains before removing any covers from the system (Please note: There are no
user serviceable parts within the Art380 and so the covers should only be removed by a
competent technician).
Connections to the telephone line
Each telephone line coming into your home or office must be fitted with a six pin primary
socket installed by the PTO (Public Telecommunication Operator). It is illegal to tamper in any
way with this primary socket and you can’t install it yourself. Additional connections to the
primary socket must be carried out using a BT style plug (You cannot connect directly to the
