13 of 19
Access code setup
The access code is used to restrict access to the programming menu and commands. It can
be disabled, setup for both local calls and diverted calls or setup for just diverted calls.
Specialised setup
The following options can be adjusted for specialised situations. For standard installations
these setting will not normally need to be adjusted.
Pulse mode:
The pulse mode
facility can be used with old pulse
style telephones which can not
generate DTMF tones.
Code Pulse
mode
** [
Code
] 13 0
Disabled (Default)
** [
Code
] 13 1
Activated
PABX mode:
PABX mode can be
used on systems which do not
have a telephone line or have a
telephone line but needs to be
isolated from it. When this is
activated it will be necessary to
press 0 to select the telephone
line before dialling a number.
Code PABX
Mode
** [
Code
] 14 0
Disabled (Default)
** [
Code
] 14 1
Activated
Note:
It is also possible to put the Art380 into PABX
mode by following these steps:
1. Switch the mains off to the Art380
2. Short terminals - & SK.
3. Turn on the mains to the Art380
4. Remove the short from terminals - & SK (After
a short click)
Note: This procedure also defaults the Art380.
Disable ** Mode:
An alternative
to using the ** to enter
programming is RECALL RECALL
or FLASH FLASH.
Code **
** [
Code
] 17 0
Enabled (Default)
** [
Code
] 17 1
Disabled
Direct DTMF reading:
Allows the
tones to be read during a call by
the Art380 without first pressing
**
Code DTMF
Reading
** [
Code
] 18 0
Disabled
** [
Code
] 18 1
Enabled (Default)
At home control:
This feature
allows the ‘divert call’ to be
automatically switched off when
active by simply picking up one of
the handsets on the output of the
Art380 and replacing it.
Code
At home control
** [
Code
] 30 0
Enabled
** [
Code
] 30 1
Disabled (Default)
Edit or delete code:
Code
** [
Code
] 31 XXXX
Change the code to XXXX
** [
Code
] 31 1111
Delete the code
Enable/Disable access code for
local calls:
Code
Enabled or disabled
** [
Code
] 20 0
Enabled
** [
Code
] 20 1
Disabled (Default)
