11 of 19
Using auxiliary outputs:
•
To activate auxiliary 1 (A1) during a call simply press
5
. If the auxiliary output is set to latch
then it will be necessary to press
5
again to unlatch the output.
•
To activate auxiliary 1 (A1) without a call being in progress simply pick up the handset and
press
** [
Code
]
5
. If the output is set to latch, follow the same procedure to unlatch.
•
To activate auxiliary 2 (A2) during a call simply press
6
. If the auxiliary output is set to latch
then it will be necessary to press
6
again to unlatch the output.
•
To activate auxiliary 2 (A2) without a call being in progress simply pick up the handset and
press
** [
Code
]
6
. If the output is set to latch, follow the same procedure to unlatch.
Additionally, Auxiliary output A2 can be programmed to automatically activate when a call is
placed. Please note: If A2 is set to activate automatically it can not also be set to latch as
indicated above.
Advanced speech setup options
The speech on the Art380 can be setup to work in a number of different ways. This could be
simplex, duplex or even hands free. Additional to being able to adjust the speech volume by
means of the volume controls on the door panel it is also possible to adjust the volume in both
directions electronically.
Dial in facility setup
The dial in facility can be used to allow a caller from a telephone line to dial into the Art380
and access the functions available. This could be to open the door or activate an auxiliary
output.
Code Output Code
Output
** [
Code
] 19 0
Automatic ** [
Code
] 19 1
Manual
Changing the speech volume
electronically:
The volume can be
adjusted from 0 – 9. 0 being the lowest
volume and 9 being the highest.
Code
Direction of speech
** [
Code
] 26 (0-9)
Telephone to door panel
** [
Code
] 27 (0-9)
Door panel to telephone
One way speech mode:
Simplex
speech mode will allow each direction
of speech to be opened independently.
Code
Direction of speech
** [
Code
] 16 (0)
Both directions
** [
Code
] 16 (1)
Transmitting to door panel
** [
Code
] 16 (2)
Receiving from door panel
Hands free speech mode:
The
speech will automatically adjust to the
direction of speech activity.
Code Hands
free
** [
Code
] 15 (0)
Not activated
** [
Code
] 15 (1)
Activated
Activating / deactivating the
dial in facility:
Code Facility
** [
Code
] 12 (0)
Disabled (Default)
** [
Code
] 12 (1)
Enabled
Activate after a number of
rings:
The Art380 can count the
number of rings before it activates
and tales hold of the call. This can
be set from 1 – 10 rings. (Note:
Each BT ring is a double ring and
so counts as two rings.)
Code Rings Code Rings
** [
Code
] 25 (1)
1
** [
Code
] 25 (6)
6
** [
Code
] 25 (2)
2
** [
Code
] 25 (7)
7
** [
Code
] 25 (3)
3
** [
Code
] 25 (8)
8
** [
Code
] 25 (4)
4
** [
Code
] 25 (9)
9
** [
Code
] 25 (5)
5
** [
Code
] 25 (0)
10
