Videotec ulisse netcam, Instruction Manual

Page: 40 / 204

EN - English - I
nstruc
tions manual
38
10 Accessories
10.1 Washer
If the pan & tilt is fitted with a wiper, it can also have
an external pump supplying water to clean the glass.
As shown in the picture, the spray to clean the glass is
outside the pan & tilt.
Fig. 77
Once the command has been sent the pan & tilt
positions itself with the glass facing the spray (9.1.3
User Controls, page 31). The pump and wiper are
activated for a set period of time. At the end of the
operation the P&T returns to its initial position.
For further information refer to the relative
chapter (9.1.3 User Controls, page 31).
10.1.1 Connecting the pump
The connections illustrated below should
be made only and exclusively by skilled
operatives who should comply scrupulously
with all the wiring and power supply
instructions. Failure to do so could create
serious risks for the operator and would
invalidate the guarantee.
The diagram shows:
•
O1
- C1: Clean contact for starting the water pump.
O1 C1
Fig. 78