Videoswitch Vi-R3016L User Manual Download

Page: 181 / 187

Videoswitch Vi-R3008L/Vi-R3016L User Manual

180

property), upgrading system firmware, clearing I/O alarm output.

•

Local Shutdown /Reboot: Shutting down or rebooting the device.

Remote Configuration

•

Remote Log Search: Remotely viewing logs that are saved on the device.

•

Remote Parameters Settings: Remotely configuring parameters, restoring factory default

parameters and importing/exporting configuration files.

•

Remote Serial Port Control: Configuring settings for RS-485 ports.

•

Remote Video Output Control: Sending remote control panel signal.

•

Two-Way Audio: Realizing two-way radio between the remote client and the device.

•

Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote

client) and controlling the alarm output.

•

Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware, clearing I/O alarm output.

•

Remote Shutdown/Reboot: Remotely shutting down or rebooting the

device.

Camera Configuration

•

Remote Live View: Remotely viewing live video of the selected camera (s).

•

Local Manual Operation: Locally starting/stopping manual recording, picture capturing

and alarm output of the selected camera (s).

•

Remote Manual Operation: Remotely starting/stopping manual recording, picture capturing and

alarm output of the selected camera (s).

•

Local Playback: Locally playing back recorded files of the selected camera (s).

•

Remote Playback: Remotely playing back recorded files of the selected camera (s).

•

Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).

•

Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).

•

Local Video Export: Locally exporting recorded files of the selected camera (s).

Note:

You should select the camera (s) on the Camera Configuration interface for the operation

permission configured.

Click the

button to save the settings and exit interface.

Note:

Only the

admin

user account has the permission of restoring factory default parameters.

13.5.2 Deleting a User

Steps:

Enter the User Management interface.

Menu > Configuration > User

Select the user to be deleted from the list.

Summary of Contents for Vi-R3016L




























































































































































































Search results

Summary of Contents for Vi-R3016L

Reviews:

Related manuals for Vi-R3016L

Brands by name

Popular brands

Videoswitch Vi-R3016L, User Manual

Search results

Summary of Contents for Vi-R3016L

Reviews:

Related manuals for Vi-R3016L

Brands by name

Popular brands