Videoswitch Vi-K2, User Manual

Page: 96 / 107

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
94
24.6 Presets
24.6.1 Recalling a Preset
•
Press the
PRESET
key.
•
The display will show the letter “
P—
”.
•
Press one of the number keys
1
,
2
,
3
…
16
to select a preset that has previously been stored.
•
The dome will move to that preset position.
•
If the joystick is moved, the preset display will be cancelled.
24.6.2 Setting a Preset
•
Move the dome to the position at which you wish to set a preset.
•
Press and hold the
ALT
key and then press the
STORE
key.
•
The display will show the letter “
P—
”, flashing.
•
Press one of the number keys
1
,
2
,
3
…
16
to select a preset.
•
Press and hold the
ALT
key and then press the
STORE
key to store the preset.
24.6.3 Clearing a Preset
•
Press and hold the
ALT
key and then press the
STORE
key.
•
The display will show the letter “
P—
”, flashing.
•
Press one of the number keys
1
,
2
,
3
…
16
to select a preset.
•
Press and hold the
ALT
key and then press the
WIPE
key to clear the preset.
24.7 Tours
24.7.1 Running a Tour
•
Press the
TOUR
key.
•
The display will show the letter “
t—
”.
•
Press one of the number keys
1
,
2
,
3
or
4
to select a tour number.
•
The dome will run the tour until the
TOUR
key is pressed again.
24.7.2 Programming a Tour (Pattern)
To start the tour programming:
•
Holding the
ALT
key on, press the
PROG
key.
•
The display will show the letter “
t—
”, flashing.
•
Press one of the number keys
1
,
2
,
3
or
4
to select a tour number.
•
Holding the
ALT
key on, press the
PROG
key.
•
The display shows flashing “
rEC
”.
•
All joystick movements will be recorded until the programming is finished.