Videoswitch Vi-K2, User Manual

Page: 31 / 107

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
29
8.8.1 Running a Tour
•
Press the
TOUR
key.
•
The display will show the letter “
t—
”.
•
Press one of the number keys
1
(sequence, default dwell and speed) or
2
(tour, individual dwell and
speed per preset).
•
The dome will run the tour until the
TOUR
key is pressed again.
8.8.2 Programming Tour 1
To start the tour programming:
•
Holding the
ALT
key on, press the
PROG
key.
•
The display will show the letter “
t—
”, flashing.
•
Press one of the number key
1
to select a tour number.
•
Holding the
ALT
key on, press the
PROG
key.
Repeat these steps for each position in the tour:
•
The display will show the letters “
PoS
”, flashing (asking for a preset position).
•
Enter the next preset position number
1
,
2
,
3
…
16
.
•
Holding the
ALT
key on, press the
PROG
key, and repeat for all positions.
To finish programming a tour:
•
Holding the
ALT
key on, press the
PROG
key (i.e. without entering another position) to finish
the tour programming.
•
The word “
Fin
” will be displayed, indicating that the tour programming has finished.
•
Finally, Holding the
ALT
key on, press the
PROG
key to return the display to its normal mode.
8.8.3 Programming Tour 2
To start the tour programming:
•
Holding the
ALT
key on, press the
PROG
key.
•
The display will show the letter “
t—
”, flashing.
•
Press one of the number key
2
to select a tour number.
•
Holding the
ALT
key on, press the
PROG
key.