Videoswitch Vi-K2, User Manual

Page: 58 / 107

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
56
•
The display will show the letters “ PoS ”, flashing (asking for a preset position)
•
Enter the next preset position number
1
,
2
,
3
…
16
.
•
Holding the
ALT
key on, press the
PROG
key.
•
The display will show the letters “ dLL ”, flashing (asking for a dwell time)
•
Optionally enter a new dwell time (
0
,
1
,
2
…
9
where each increment represents 2 seconds).
•
Holding the
ALT
key on, press the
PROG
key.
•
The display will show the letters “ Spd ”, flashing (asking for a speed).
•
Optionally enter a new speed value to determine how long the dome takes to get from one position
to the next (
0
,
1
,
2
…
9
where each increment represents 2 seconds).
•
Holding the
ALT
key on, press the
PROG
key, and repeat for all positions.
To finish programming a tour:
•
The tour can be finished when the letters “ PoS ” are displayed, as follows:
•
Holding the
ALT
key on, press the
PROG
key (i.e. without entering another position) to finish the
tour programming.
•
The word “
Fin
” will be displayed, indicating that the tour programming has finished.
•
Finally, Holding the
ALT
key on, press the
PROG
key to return the display to its normal mode.
14.9 Privacy commands
Set whole
•
Press and hold
ALT
then press the
F9
key.
Clear whole
•
Press and hold
ALT
then press the
F10
key.
Uncover all
•
Press and hold
ALT
then press the
F11
key.
Replace all
•
Press and hold
ALT
then press the
F12
key.
14.10 Other Commands
180
°
turn:
•
Press and hold the
ALT
key and then press the
F1
key.
Colour/mono toggle:
•
Press and hold the
ALT
key and then press the
F2
key.
Pan / tilt speed scaling on:
•
Press and hold the
ALT
key and then press the
F13
key.
Pan / tilt speed scaling off: