background image

Dry contact

Existing control 

panel

1.4 XTENDER mode

The  Videofied

® 

W panel can be used as a standalone alarm system.

When fitted with the WIO100 input/outputs module, it can also be wired to an 

existing alarm system

 with a 

programmable dry contact.

When used in XTENDER mode, the W panel can only be armed when the programmed condition for arming is met.

For example, if the XTENDER input type parameter is set as 

normally open

, the system 

will arm

 when 

the circuit 

is closed

.

Opening the circuit will disarm the panel.

4

W Panel 

www.videofied.com

WIO 100 Input/Outputs module

When used in XTENDER mode, 

arming devices

 (keypads, keyfobs, badge readers) 

cannot arm or disarm the system

To switch between standalone mode and XTENDER mode, go to the menu :

CONFIGURATION

 (Lvl 4) > 

GENERAL PARAMETERS 

XTENDER

Note : 

Enabling the programmable input will automatically disable the XTENDER mode and switch the W panel in standalone 
mode. In the same manner, enabling the XTENDER mode will automatically disable the programmable input.

Like when it is used as a 

programmable input, the 

WIO100 input used as an 

XTENDER arming input can 

be supervised thanks to the 

two 4.7k

Ω

 resistors provided 

with the module.

A P P L I C A T I O N   N O T E

Summary of Contents for WIO100








Reviews: