Victron energy BlueSolar 150/100 Manual Download

Page: 9 / 70

• Android
• Apple iOS (Note that USB is not supported, it is only possible to connect via Bluetooth)
• MacOs
• Windows (Note that Bluetooth is not supported, it is only possible to connect via USB)

Where to download the VictronConnect App from

The VictronConnect App can connect to the solar charger via its built-in Bluetooth.

VictronConnect App connection via built-in Bluetooth

The VictronConnect App can connect to the solar charger via the

VE.Direct USB interface

VictronConnect App connection via USB using a VE.Direct USB interface

The VictronConnect App can connect remotely to the solar charger via a

GX device

connected to the same local network or via

the internet using the

VRM portal

VictronConnect App connection via LAN or the internet (VRM portal) using a GX device (for example a Cerbo GX)

3.6. Display

There are a number of display options:

• The

• A

• The

needed)

• The

SmartSolar Control display

- an external display that plugs into the front of the solar charger

• The

MPPT Control

- an external display that connects to the VE.Direct port (the VE.Direct cable is not included with the MPPT

Control)

MPPT solar charger manual

Page 5

Features

Summary of Contents for BlueSolar 150/100







































































Search results

Summary of Contents for BlueSolar 150/100

Reviews:

Related manuals for BlueSolar 150/100

Brands by name

Popular brands

Victron energy BlueSolar 150/100, Manual

Search results

Summary of Contents for BlueSolar 150/100

Reviews:

Related manuals for BlueSolar 150/100

Brands by name

Popular brands