Victron energy Bluesolar-10, Manual

Page: 15 / 33

12
Step 2: Load Wiring
The controller loads can be connected to such electrical equipments as lights, pumps,
motors and others.
Figure 3-3 Load Wiring
Connect the positive (+) and negative (-) to the controller load terminals as shown in Figure
3-3.
An in-line fuse holder should be wired in series in the load positive (+) or negative (-) wire as
show in Figure 3-3.
Do not insert a fuse at this time.
If wiring the load connection to a load distribution panel, each load circuit should be fused
separately. The total load draw should not exceed the load rated current of the controller.
Fuse
Load