Victory MATV 48, Operator'S Manual

Page: 40 / 66

Operator’s Manual Victory MATV Series
- Page 40 of 66 - Version 2.0
◼
The yellow stickers with a grease
gun indicate where the essential
grease nipples are.
N O T I CE :
•
Ensure that the grease nipples are screwed in tightly. Occasionally, dried
paint may cover the end of the fitting on the shaft.
Remove this by scraping the paint off with a knife before injecting grease
into these nipples.
7.3 Service Period
◼
The recommended period is based on normal operating conditions. Severe or unusual
conditions may require more frequent maintenance.
7.3.1 8 Hours or Daily Maintenance
◼
Check all nuts and bolts in connection parts; replace if required.
◼
Pump grease into each grease nipple three to five times.
◼
Clean the implement; take away all debris and residue.
7.3.2 Season Maintenance
◼
Check the machine as above for Daily maintenance.
◼
Check the bearings of shafts for wear and tear. If worn, disassemble, clean or replace them if
necessary; use grease as required.
◼
Check the drive belts, and tighten them if necessary.
◼
Check the tire's air pressure; it must be 28 psi.
7.3.3 Annual Maintenance
Drain the engine oil and clean the engine thoroughly. Fill with new oil up to the dedicated oil level.
Replace the air filter components. See Briggs & Stratton documentation.