Victory MATV 48 Operator'S Manual Download

Page: 25 / 66

Operator

’s Manual Victory MATV Series

- Page 25 of 66 -

Version 2.0

STEP 1: Unpack

Unpack the crate and check that all parts are secure. Please contact us immediately if any part is
missing or damaged at Victory Tractor Implements.

Scope of delivery:

◼

Mower body with a gasoline engine and flail shaft
installed.

◼

Wheels and support brackets, two pcs.

◼

Sole plate weldment.

◼

Drawbar components.

◼

Instruction manual.

STEP 2: Install the wheels

You have three options for mounting the wheels:

Inside the mower frame border on the rear side.

Outside the mower frame side border on the rear side:

Outside the mower frame at the level of the rotor shaft:

The figure shows wheel mounting inside the frame side border.

◼

Install the support brackets with wheels
on both sides in the desired position.

◼

Connect the support brackets with the
height adjusters on both sides.

◼

Adjust the wheels in the highest
position.

Summary of Contents for MATV 48



































































Search results

Summary of Contents for MATV 48

Reviews:

Related manuals for MATV 48

Brands by name

Popular brands

Victory MATV 48, Operator'S Manual

Search results

Summary of Contents for MATV 48

Reviews:

Related manuals for MATV 48

Brands by name

Popular brands