Victory BACKHOE BH6, Operator'S Manual

Page: 30 / 91

Operator’s Manual Backhoe Series BH
- Page 30 of 91 - Version 2.0
9.
Carefully pull the left control handle to lift the boom.
10.
Use the two central control handles to move both stabilizers until they reach the ground.
11.
Swing the boom in the straight center position and install the swing pivot lock pin.
Place the bucket on the ground. The backhoe stands in a stable position.
12.
Unbolt the Backhoe frame from the crate bottom and remove all remaining strapping and
skid. Reposition the hoist on the Backhoe to prevent tipping.
13.
Use the control handles for the boom and stabilizers to lift the frame in a level position
approx. 10” above the ground. It is the installing position. Remove the crate bottom.
◼
Keep the Backhoe frame level
during assembling and mounting
procedures. (Perpendicular to the
ground).
◼
During assembling, approx. 12 ”
(BH6) or 14” (BH7 -8) off the
ground.
14.
Check the installation carefully and ensure all parts are correctly installed and securely
fastened.
◼